1. norbit / FIELD JACKET/HNJK-024, photo 1 of 4
  2. norbit / FIELD JACKET/HNJK-024, photo 2 of 4
  3. norbit / FIELD JACKET/HNJK-024, photo 3 of 4
  4. norbit / FIELD JACKET/HNJK-024, photo 4 of 4

Photos: norbit

norbit · Outerwear

norbit / FIELD JACKET/HNJK-024

$80View listing

Identified as
M-65 field jacket · Outerwear
Reference
Alpha Industries M-65 Field Jacket (Heritage) · Represents the M-65 Field Jacket (Heritage) pattern of 1965; no single maker
Materials
Not stated · No fibre composition in the listing

norbit's M-65 field jacket, descended from the M-65 Field Jacket (Heritage) pattern of 1965, compared here with the Alpha Industries M-65 Field Jacket (Heritage). It differs from the M-65 Field Jacket (Heritage) in the stand collar with a hood rolled into it, zip front under a snapped storm flap and buttoned shoulder epaulettes: no collar, a button front and no epaulettes; the snap-flap chest pockets, snap-flap hip pockets, hook-and-loop cuff tabs, drawcords at waist and hem and buttons for a quilted liner cannot be made out. The listing says nothing about construction and does not say where it is made.

Reference · the M-65 Field Jacket (Heritage) pattern

The US Army adopted the Coat, Cold Weather, Field, M-1965 to replace the M-1951 field jacket, itself a development of the wartime M-1943: a windproof, water-repellent shell worn over a button-in liner as part of a layered cold-weather uniform. Against the M-1951 it swapped the button-on hood for one that rolls into a zipped pouch in the collar, replaced button cuffs with hook-and-loop tabs, and moved to a nylon/cotton sateen. It was made to the government specification by several contractors; Alpha Industries of Knoxville, Tennessee won its first M-65 contract in 1965 and kept making it for the Army for about 25 years. A pattern, not a single commercial originator.

United States, 1965

Docent compares against the Alpha Industries M-65 Field Jacket (Heritage), a current product that represents the pattern. Current version

How the M-65 field jacket changed, 1943-1965 to present
  1. 1943–1965The M-1943 field jacket introduces the hip-length, hooded, layered field uniform in cotton sateen; the M-1951 adds snap closures, button cuffs and a button-on hood and is issued through Korea and the early Vietnam years.
  2. 1965–1980Adopted in 1965 and issued through the Vietnam War in Olive Green 107. From 1966 the shell is a 50/50 nylon/cotton sateen; zips move from aluminium alloy to brass around 1972. Alpha Industries holds M-65 contracts from 1965 and begins selling jackets commercially in 1970.
  3. 1970s–1980sReturning veterans and surplus stock put the jacket on civilians; Al Pacino wears one in Serpico (1973), Robert De Niro in Taxi Driver (1976) and Woody Allen in Annie Hall (1977). Woodland camouflage is issued from 1981 alongside the Battle Dress Uniform, and nylon zips replace brass from about 1986.
  4. 1990s–presentAlpha's government contracts end around 1990 and the firm sells to the civilian market; the Army issues desert and Universal Camouflage variants and stops issuing the coat in 2009 in favour of the Extended Cold Weather Clothing System, though the specification (MIL-DTL-43455K, 2007) stays active. Japanese reproduction houses make it to the specification at a premium; fashion versions slim the body, drop the hood, liner buttons and hook-and-loop, and use cotton or poly/cotton shells.
  1. Stand collar with a hood rolled into itDiffers

    The Alpha Industries M-65 Field Jacket (Heritage) has a stand collar with a hood rolled into it; this product has no collar.

    A thin drawcord hood is stowed between the layers of the collar and pulled out through a horizontal zip on the underside. The M-1951's hood was a separate piece that buttoned on; the M-65's is always with the jacket. Four buttons at the collar still take the fur-ruffed winter hood.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Stand collar with a hood rolled into it on this product, as the listing shows it
    This product · photo: norbit
  2. Snap-flap chest pocketsUnclear

    The listing does not say, and the snap-flap chest pockets cannot be made out.

    Two bellows chest pockets, each closed with a flap and snaps. The two larger lower pockets are a detail of their own.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Snap-flap chest pockets on this product, as the listing shows it
    This product · photo: norbit
  3. Snap-flap hip pocketsUnclear

    The listing does not say, and the snap-flap hip pockets cannot be made out.

    Two large lower pockets, each closed with a flap and snaps. On the issued coat they hang inside the shell rather than being patched on, so the front stays flat. The chest pockets are a detail of their own.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Snap-flap hip pockets on this product, as the listing shows it
    This product · photo: norbit
  4. Zip front under a snapped storm flapDiffers

    The Alpha Industries M-65 Field Jacket (Heritage) has a zip front under a snapped storm flap; this product has a button front.

    A metal slide fastener runs the length of the front and is covered by a flap that closes with snaps. Issued coats used aluminium-alloy zips until about 1971, brass through the mid-1980s and nylon afterwards, so zip material is one way collectors date a jacket.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Zip front under a snapped storm flap on this product, as the listing shows it
    This product · photo: norbit
  5. Hook-and-loop cuff tabsUnclear

    The listing does not say, and the hook-and-loop cuff tabs cannot be made out.

    Hook-and-loop tabs at the cuffs tighten the sleeve over a fold-out hand shield. These replaced the M-1951's button cuffs and are the fastening most often changed on civilian versions. The M-65's collar closes with a hook-and-loop tab too; it is not judged here.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Hook-and-loop cuff tabs on this product, as the listing shows it
    This product · photo: norbit
  6. Drawcords at waist and hemUnclear

    The listing does not say, and the drawcords at waist and hem cannot be made out.

    Cords run through internal channels at the waist and at the hem so the wearer can close the jacket against wind and shape an otherwise straight-cut body.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Drawcords at waist and hem on this product, as the listing shows it
    This product · photo: norbit
  7. Buttoned shoulder epaulettesDiffers

    The Alpha Industries M-65 Field Jacket (Heritage) has buttoned shoulder epaulettes; this product has no epaulettes.

    A buttoned strap on each shoulder, added after the first production pattern to stop slung equipment sliding off; the last issued variant removed them again.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Buttoned shoulder epaulettes on this product, as the listing shows it
    This product · photo: norbit
  8. Buttons for a quilted linerUnclear

    The listing does not say, and the buttons for a quilted liner cannot be made out.

    Buttons inside the shell take the separate quilted liner (Liner, Coat, Man's Field, M-65), making the jacket the outer layer of a cold-weather system rather than a single-weight coat. Alpha sells the liner separately today, as the Army did.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    Buttons for a quilted liner on this product, as the listing shows it
    This product · photo: norbit
  9. Nylon/cotton sateen shellNot stated

    The listing does not say, and the nylon/cotton sateen shell cannot be made out.

    The specification calls for a wind-resistant nylon/cotton sateen (MIL-C-43191) with a water-repellent finish, in Olive Green 107; from 1966 the blend was 50/50. Woodland camouflage followed in 1981. The tight sateen weave is what makes the jacket windproof.

    No clear view
    Alpha Industries M-65 Field Jacket (Heritage)
    No clear view
    This product

Construction

Expected at this price2 detailsWhat a M-65 field jacket should state
Stated by the listing0 of 2Nothing on seams, tacks or finishing
What it does sayNothingNo construction or feature claims

A well-made M-65 field jacket usually has double-needle seams, bar tacks; the listing does not say. Silence is not a verdict: a maker that does these things usually says so, and each can be checked in a minute with the product in hand.

  1. Double-needle seams

    Listing: not stated

    Two parallel rows of stitching along a seam, sewn at once by a two-needle machine or in two passes.

    What it tells you

    Stronger seam that resists pulling apart under stress; standard on well-made outerwear and workwear. Not a marker of luxury, but its absence on a jacket is worth noticing.

    How to check it yourself

    Look along the main body and sleeve seams from the outside for two even rows of stitching a few millimetres apart.

  2. Bar tacks

    Listing: not stated

    A short, dense block of zigzag stitching placed at a stress point: pocket corners, belt loops, fly bottoms, zip ends.

    What it tells you

    The maker expected the garment to be pulled at and reinforced accordingly. Cheap to do, so its absence at pocket corners is informative.

    How to check it yourself

    Look at the top corners of each pocket opening for a small dense rectangle of stitching, usually 5 to 10 mm long.

Composition and materials

The listing does not state a fibre composition.

Not stated in the listing
  • Fibre composition
  • Country of origin

Notes: no-community-sentiment